Commercial roofing
Commercial Roofing in Atlanta, GA
We repair and replace flat and low-slope roofs on offices, retail, warehouses, churches and multifamily buildings across Atlanta, GA and surrounding areas, in GAF TPO, PVC and modified bitumen. You get a roof assessment and a written scope before you decide.
One roof, a lot riding on it.
A commercial roof protects tenants, stock, equipment and the people who use the building every day. A leak can disrupt a store, damage an office or interrupt a tenant, and it can soak the insulation long before anyone sees water inside.
On a flat roof the details matter most: drainage, rooftop units, seams, penetrations, flashing, insulation and the roof edge. We look at all of it and give you a plain assessment and a written scope.
Commercial Roof Replacement
A new GAF TPO, PVC or modified bitumen roof for flat and low-slope buildings, scoped around your tenants and hours.
- Roof survey and core cuts
- Drainage check
- Tear-off or recover prep

Commercial Roof Repair
Leaks, open seams, punctures and failed flashing on flat roofs, traced and fixed before they reach the inventory.
- Leak tracing
- Roof condition survey
- Membrane and seam repair

Flat and low-slope roofing systems
TPO, PVC and modified bitumen are not interchangeable. Each has its own install requirements and upkeep, and the right one depends on the building.

TPO
A heat-welded single-ply membrane, common on retail, office and industrial roofs. Reflective options are available; the right assembly depends on insulation, attachment and code.

PVC
Also heat-welded single-ply. It can suit roofs exposed to grease or some chemicals, once the manufacturer confirms compatibility with what the building puts on the roof.

Modified bitumen
Asphalt-based membrane built up in layers, which details and repairs well on many roofs. The substrate and system design decide which product fits.
Why flat roofs fail
Problems usually start at transitions, not in the open middle of the roof: HVAC curbs, pipes, parapet walls, edge metal, seam laps, drains and scuppers. Heavy rain, debris, sun, foot traffic and age all wear on them.
Signs the roof needs a look
- Water still standing days after rain, or drains that no longer keep up.
- Leaks that keep coming back, stained ceiling tiles or damp around rooftop units.
- Open seams, punctures, wrinkles, damaged flashing or loose edge metal.
- Soft spots underfoot, or wet insulation suspected under the membrane.
- Repair bills that keep returning without fixing the cause.
For buildings that can’t just close
Before we recommend an approach, we talk through access, tenant schedules, rooftop equipment, deliveries, parking and anything that has to stay protected. Phasing and weather protection go in the plan, not left to assumption.
- 01
Tell us about the building
Roof type and age if you know them, where it leaks, how the building is used and any recent repairs.
- 02
We assess the roof
Membrane, drainage, rooftop details and signs of trapped moisture. Test cuts only with your approval.
- 03
Compare the options
Local repair, a recover where the roof qualifies, or a full replacement, checked against code and the manufacturer’s requirements.
- 04
A written proposal
Scope, the proposed roof assembly, access, phasing and dates on paper before you decide.
- 05
Plan, build and close out
Access, protection and milestones agreed up front, then photos and any guarantee paperwork the system qualifies for at the end.
Based in Smyrna, working across Metro Atlanta
We work from one office, at 2284 Old Concord Rd SE, Smyrna,GA30082. We take commercial roofing calls from across Cobb, Fulton, DeKalb and Gwinnett counties, including Atlanta, Marietta, Sandy Springs, Roswell, Alpharetta, Kennesaw, Decatur, Brookhaven, Dunwoody and Duluth. Give us the building’s address when you call.
Budgeting
What does a commercial roof cost?
There’s no single price per square foot. Here’s what moves the number and what a proposal should show.
Commercial roofingquestions.
Something else on your mind? Call (770) 432-5169
Commercial roofing
Do you repair flat roofs, or only replace them?
Both. If the damage is limited and the rest of the roof is serviceable, a repair may be all it needs. Widespread deterioration or moisture that keeps coming back can make replacement the better option.
Is TPO or PVC better for a commercial roof?
Neither is best for every building. Both are heat-welded single-ply membranes, but what the roof is exposed to, the attachment method, the building details and the budget decide it. Seeing the roof narrows it down.
How long does a TPO commercial roof last?
It varies with membrane thickness, installation, drainage, rooftop traffic, sun and upkeep. A guarantee term is not a promise of lifespan, so compare the exact system and what maintenance it needs.
Do commercial roofs qualify for manufacturer guarantees?
Some GAF commercial assemblies can, when the materials, design, installation and contractor all meet GAF’s requirements. Our GAF Certified status is for residential roofing and does not make a commercial roof eligible. Ask which manufacturer guarantee, if any, your exact system qualifies for.




